- New
0
844.72 tax excl.
Ubiquiti UniFi Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) – a compact managed Layer 2 switch with eight 2.5 GbE PoE++ ports and two 10G uplinks (RJ45 and SFP+). Power Wi-Fi access points, cameras and other PoE devices without separate power supplies.
Payments by bank transfer, Blik or by Card:
Visa, Visa Electron, Mastercard, MasterCard Electronic, Maestro
UniFi Flex 2.5G PoE (USW-Flex-2.5G-8-PoE) is a compact managed Layer 2 switch that combines fast 2.5 GbE ports with PoE++ power and two 10G ports. It is a good fit for homes, offices and small businesses – anywhere you need to connect and power Wi-Fi access points, cameras or IP phones far from the rack. You configure it in the UniFi Network application together with the rest of your UniFi network.
The power available to connected PoE devices depends on how the switch itself is powered:
| Switch power source | Total PoE budget |
|---|---|
| 210 W adapter (sold separately) | 196 W |
| PoE+++ (802.3bt, 90 W) on the 10 GbE RJ45 port | 76 W |
| PoE++ (802.3bt, 60 W) on the 10 GbE RJ45 port | 46 W |
| PoE+ (802.3at, 30 W) on the 10 GbE RJ45 port | 16 W |
The full 196 W – for example for several access points and cameras at once – is available only with the 210 W adapter. When the switch is powered over PoE, the budget is lower and covers a few smaller devices.
The switch requires UniFi Network version 9.0.114 or later – on a UniFi console (e.g. a Cloud Gateway or Dream Machine) or on a self-hosted UniFi Network server. Once adopted, you configure ports, VLANs and PoE power, and see the device status and port traffic in one dashboard with the rest of your UniFi network.
| Model | USW-Flex-2.5G-8-PoE (UniFi Flex 2.5G PoE) |
|---|---|
| Type | Managed switch, Layer 2 |
| 2.5 GbE RJ45 ports | 8 (2.5G/1G/100M/10M), all with PoE++ |
| 10 GbE RJ45 port | 1 (10G/5G/2.5G/1G/100M), PoE+++ power input |
| 10G SFP+ port | 1 (10G/1G) |
| Max. PoE per port | PoE 15.4 W / PoE+ 32 W / PoE++ 64 W |
| Total PoE budget | 196 W (210 W adapter), 76 W (PoE+++), 46 W (PoE++), 16 W (PoE+) |
| Power | 210 W AC/DC adapter (sold separately) or PoE+++ on the 10 GbE RJ45 port; 50–57 V DC/PoE |
| Max. power consumption | 17 W excluding PoE output (adapter), 14 W excluding PoE output (PoE input), 210 W including PoE output |
| Switching capacity | 60 Gbps |
| Non-blocking throughput | 30 Gbps |
| Forwarding rate | 45 Mpps |
| VLANs / MAC address table | 256 / 4,000 |
| Layer 2 features | STP and RSTP, loop protection, port isolation, port mirroring, flow control, storm control, egress rate limiting, multicast and broadcast rate limiting, jumbo frames |
| Management | UniFi Network 9.0.114 or later |
| Mounting | Desktop or wall (horizontal or vertical) |
| Dimensions | 212.9 × 99.4 × 33.5 mm |
| Weight | 567 g |
| Enclosure | Polycarbonate, white |
| Operating temperature | -20 to 45 °C |
| Operating humidity | 10–90%, non-condensing |
| Certifications | CE, FCC, IC; NDAA compliant |
Note: the 210 W power adapter is not included – buy it separately or power the switch over PoE+++ (with a lower PoE budget, see the table above).